Measuring instruments for pressure and temperature are employed in almost all areas of industrial manufacturing. As a result of continuous mechanical, chemical and thermal loading, these instruments age and can therefore not guarantee the correctness of the measured values over the course of time. Through timely calibration, however, the alteration of the measured value can be determined.
Along the way of calibration, the displayed value of the measuring instrument is compared with the measuring consequence of another measuring device that is known to function correctly and accurately and which itself has been made to coincide directly or indirectly with a national (or international) reference instrument. In a nutshell, to compare measuring results, they need to be ? pressure gauge 10 bar ? to ไดอะแฟรม or international standard via a chain of comparative measurements. The calibration hierarchy shown in the picture (using the example of Germany) depicts the traceability of an inspection equipment in a company up to a national standard at the PTB (German national metrology institute).
So that you can ensure traceability used, the following points should be observed, amongst others:
The chain of comparison should not be interrupted.
The measurement uncertainty should be known in each stage of the calibration chain in order that the total measurement uncertainty could be calculated. As a rule, a superordinate measuring instrument should have a measurement accuracy 3 to 4 times higher.
Each part of the calibration chain must be documented, like the measurement results.
All bodies following a stage in the chain must prove their competence by way of accreditation.
Calibrations must be repeated at appropriate intervals. The periods be determined by the demanded measurement accuracy and the technical requirements
Note
The WIKA calibration laboratory is accredited by the German Accreditation Body (Deutsche Akkreditierungsstelle ? DAkkS) relative to DIN EN ISO / IEC 17025 for the measurands temperature, pressure, DC current, DC voltage and DC resistance. Further information on our calibration laboratory or an on-site calibration with the WIKA calibration van can be found on the WIKA website. Should you be interested in our services, please feel free to e mail us via e-mail.
Find out about the differences between factory calibration and traceable calibration in the following video: